How do I select the correct Garador DR/RM Spring?Updated a month ago
The Garador DR / RM garage doors were manufactured pre-2002. The door featured two double springs down either side of the door, and the door retracted fully into the garage when opened. The link arms on the DR door were kinked with multiple fixing points for the springs.
On the end of the spring, stamped into the metal may be the spring number. If the spring is quite old, this may have rusted off. The spring number may also be on a sticker on the back of the door, e.g. 901. In these instances, you can just select the required spring from the dropdown menu.
In situations where there is no sticker on the back of the door, the number has rusted off, or the PN number is not an option on the dropdown menu, you will need to use the spring table further down the item page to determine which one is needed.
Before starting, you will need to know:
1. Door material (steel, fibreglass, or timber)
2. Door width and height
3. Door exterior pattern
Once you have this information, consult the spring table for the correct DR/RM Spring version to use.If you are unsure, please contact our team and we can advise on the best choice.